MLRC Forum
https://www.mlrc.ca/cgi-bin/yabb/YaBB.pl General >> Buy and Sell >> 14" wheels needed https://www.mlrc.ca/cgi-bin/yabb/YaBB.pl?num=1064362914 Message started by RallyVW on 09/23/3 at 19:21:54 |
Title: 14" wheels needed Post by RallyVW on 09/23/3 at 19:21:54 I'm looking for a set of 14" wheels that must be 4x100 bolt pattern. |
Title: Re: 14" wheels needed Post by dubrally on 09/27/3 at 12:36:23 Hey Rally VW, I have one set of black VW snowflake and one set of silver VW snowflake, and a heap load of sleelies all in 14". I'm in Ottawa though which may pose a problem with shipping etc. Call me if you're interested (613)286-6252 Warren |
Title: Re: 14" wheels needed Post by mr.pants on 11/14/3 at 04:45:54 I have a set of four wheels from a 1986-1987 Audi Coupe GT I may wanna get rid of, and put the money in a rally-car piggybank. These are the original Audi factory (Ronal OEM) wheels (20-spoke or something like that) in a 4x100, hub-centric pattern. Offset is 43 or 47mm, I think and they are 14-inch x 6-inch. They are in fairly fgood shape cosmetically, straight, no leaks and have been in storage for about six years, unused. E-mail me at temp001@ca.inter.net if interested. Thanks, - ed |
Title: Re: 14" wheels needed Post by Dave_H on 11/14/3 at 11:56:54 Mr. Pants, you might want to check that bolt pattern. Audi Coupe GT's were 4 x 100 from '82-'84.5 In the late 84-on models they used 4 x108mm wheels. Your '87 _should_ have 4 x 108mm, same as your 20v. HTH, -Dave |
Title: Re: 14" wheels needed Post by mr.pants on 11/14/3 at 18:43:47 Thanks, Dave... Indeed, my Coupe GT has the 4x108 pattern. These wheels I have for sale, however, do have the 4x100 pattern, which is why I don't need them. You are correct with your dates, in that these wheels may be from an earlier Audi Coupe GT (I didn't know the switch-over to 4x108 was so early). However, there were still 4x100 wheels available for the 1987 Coupe up to s/n D-200000 according to the EKTA dealer parts catalogue, but that was likely only in Europe... |
Title: Re: 14" wheels needed Post by Dave_H on 11/16/3 at 22:23:01 Ed, Check your email. -Dave |
MLRC Forum » Powered by YaBB 2.2.3! YaBB © 2000-2008. All Rights Reserved. |