MLRC Forum - Print Page

MLRC Forum
https://www.mlrc.ca/cgi-bin/yabb/YaBB.pl
General >> Rally >> Alfa odo/wiring harness diagram?
https://www.mlrc.ca/cgi-bin/yabb/YaBB.pl?num=1234377266

Message started by Jeff_Hagan on 02/11/9 at 13:34:26

Title: Alfa odo/wiring harness diagram?
Post by Jeff_Hagan on 02/11/9 at 13:34:26

Hey, all.

I've got an Alfa Elite that I'm hoping to loan out for MLWR, but it's got a problem: it's currently lacking its wiring harness.

Since there probably isn't enough time before the event to get a new one shipped here, does anyone with one know the pinouts for the odo and driver's display connectors so I can make one myself?

At a bare minimum, if I know what pins on the odo are for +12V in, ground and sensor in, I should be able to get something to work.

Title: Re: Alfa odo/wiring harness diagram?
Post by RyanHuber on 02/11/9 at 15:37:28

This probably doesn't help, but... http://www.rally.cc/elite.pdf

I don't have my harness here otherwise I'd try to help more.

Title: Re: Alfa odo/wiring harness diagram?
Post by Jeff_Hagan on 02/11/9 at 16:33:45

RyanHuber wrote on 02/11/9 at 15:37:28:

This probably doesn't help, but... http://www.rally.cc/elite.pdf

I don't have my harness here otherwise I'd try to help more.

Thanks - I already checked the manual. It's got a pinout for the terminal block, but not the odo itself.

Title: Re: Alfa odo/wiring harness diagram?
Post by Jeff_Hagan on 02/11/9 at 17:18:20

Got 'em. Someone on SpecialStage broke out the ohmmeter and checked their wiring harness, so I think I'm in business!