07/18/24 at 11:26:08
Welcome, Guest. Please
Login
or
Register
Home
Help
Search
Login
Register
MLRC Forum
›
General
›
Rally
› DIY Skidplate?
(Moderators:
Phil Jeffries
,
BryceB
,
Bruce VA3BRS
,
Derek Vincent
,
John_Vanos
)
‹
Previous Topic
|
Next Topic
›
Pages: 1
DIY Skidplate? (Read 6949 times)
Grant
Junior Member
Offline
Posts: 78
Milton
DIY Skidplate?
07/21/9 at 12:18:50
hey guys
ive just about got my car all prepared for the rallycross this sunday, the only thing still on my mind is if i should make a bolt on skid plate. ive never really done any sort of metal work, but for my crapalier i really dont feel like paying someone else to do it haha
ive heard that the summer rallies can be pretty hard on cars... is it worth the effort to make one?
if so, could someone give me some step by steps on making a simple one that at least covers my oil pan, header, ect?
thanks
Back to top
Live your dreams.
IP Logged
dtompsett
Senior Member
Offline
Posts: 461
Ontario
Re: DIY Skidplate?
Reply #1 -
07/21/9 at 14:32:04
definitely recommend it for rallyx. And heck, the skidplate on my old beater saved my butt more than once in non-rally related incidences (hit a rather large porquipine the night before a TSD rally couple years back).
As for how to do it... quick google search didn't come up with any writeups on how others have done Cavalier skidplates. It depends a lot on the car.
Get underneath the front, look at what you want to protect, and figure out how you'll mount it.
Back to top
IP Logged
Jeff_Hagan
Full Member
Offline
Posts: 196
ON
Re: DIY Skidplate?
Reply #2 -
07/21/9 at 15:45:37
Bryn Epp used to have a Cavalier that he TSD'd and rallycrossed. I'm not sure if he made a skidplate for it, but you can probably track him down through the member list here. He may have some Cavalier-specific advice.
Back to top
IP Logged
corywannamaker
Full Member
Offline
Posts: 152
Re: DIY Skidplate?
Reply #3 -
07/21/9 at 20:47:29
I would say you should have a skid plate. mi have yet to do a summer rallyx however everyone has told me to get one. I just put mine on today (97 legacy) and it went fairly easy. I do have a "metal" sponsor so I did not pay but I don't think that it would cost much to have a local metal supply shop cut you a peice of aluminium ( think that is right) and then bolt it to the car that it what I did and I think that it will work well. good luck and see you this sunday
Back to top
We will let you come play. But we wont let you win.
IP Logged
Anthony_T
Senior Member
Offline
Posts: 326
Re: DIY Skidplate?
Reply #4 -
07/21/9 at 21:15:43
Not to disagree that skidplates are not good to have - but from my personal experience has been that they are not 100% necessary (if you don't have time to get it done). A poorly mounted skidplate could actually do more harm if it came undone.
I have run rallyx in 5 different cars starting in 2001 (Golf, Jetta, Protege, CRX, Scirocco). Many of those events I ran were in the Bancroft gravel pit (when that was the only course used). Only one of the cars I ran has had a real skidplate (the rally car). I have always made it back home to North Bay after the event (285km).
I will be running this weekend - skidplate free (knock on wood).
To better answer your request I did find some cool skid plate ideas and photos here;
http://www.specialstage.com/forums/showthread.php?t=36082&highlight=wood+skid+pl...
Anthony
Back to top
«
Last Edit: 07/22/9 at 10:02:41 by Anthony_T
»
No Fame Motorsports / driver & mechanic
http://www.automotivology.blogspot.com/
http://www.nofamemotorsports.blogspot.com/
IP Logged
Slowpoke
Full Member
Offline
Tow trucks scare me.
Posts: 193
Re: DIY Skidplate?
Reply #5 -
07/22/9 at 09:26:10
Bancroft isn't within my 200km CAA tow range, and Subaru thought that putting the oil pan in front of the sub frame as the lowest point on the underside was a smart idea for the 97 Legacy L wagon 2.2L.
Grandma says that an ounce of prevention is worth a pound of cure.
Back to top
Stephen
IP Logged
Grant
Junior Member
Offline
Posts: 78
Milton
Re: DIY Skidplate?
Reply #6 -
07/23/9 at 00:22:36
I'm in the same boat as you Slowpoke. its a 350km drive home for me so i tow my car just to be safe... for the 50 bucks you pay for a tow dolly its nice to know you can smash up your car and still arrive home as long as the rear wheels are still on haha
i have a few ideas now... i already have my car up on jackstands so tomorrow ill take some cardboard and make a mock skid to determine mounting points. using marine plywood seems like an interesting idea
Back to top
Live your dreams.
IP Logged
nhibbert
Full Member
Offline
Posts: 189
Re: DIY Skidplate?
Reply #7 -
07/23/9 at 06:33:19
You're not trying to protect your undercarriage from a bit of gravel and dirt, you're tying to prevent damage from rocks the size of your head. If you hit a rock of that the size at 60kmph is marine plywood going to do anything other than shatter?
Back to top
Norman
VE3HWL
IP Logged
Grant
Junior Member
Offline
Posts: 78
Milton
Re: DIY Skidplate?
Reply #8 -
07/24/9 at 22:49:46
"There was a guy hereabouts running a GTI who used epoxy-painted 5/8" marine plywood for a skid plate. It protected well, was easy to shape with ordinary tools, sprung back into shape when hit, and above all was CHEAP. When he saw three plies or so worn through, he'd just put on a new one - I think he got three from a 4x8 sheet. He could easily swap it out at service.
If this is for rallycross, a plywood plate might last forever."
hence why i said it was interesting. if i do make one i think ill put some actual time and effort into it... trying to throw something together in the last 2 or 3 days before a rallyx didnt seem like a great idea
Back to top
Live your dreams.
IP Logged
Slowpoke
Full Member
Offline
Tow trucks scare me.
Posts: 193
Re: DIY Skidplate?
Reply #9 -
07/25/9 at 09:43:54
Sounds interesting! 1" thick plywood and you could also reinforce it with a couple of 3/16" thick aluminum straps sandwiching the board to spread the shock load and help prevent flex. 1" think would give you a lot of room to countersink the mounting bolts. Go for it!
Back to top
Stephen
IP Logged
Donnie
Full Member
Offline
Posts: 169
Re: DIY Skidplate?
Reply #10 -
07/25/9 at 13:36:36
What's next "Oar Locks"
Back to top
1989 Isuzu I-Mark
1993 Plymouth Laser RS Turbo/AWD
IP Logged
Slowpoke
Full Member
Offline
Tow trucks scare me.
Posts: 193
Re: DIY Skidplate?
Reply #11 -
07/25/9 at 13:55:38
Donnie wrote
on 07/25/9 at 13:36:36:
What's next "Oar Locks"
I could use a jib sail to help get up any hills...
Back to top
Stephen
IP Logged
nhibbert
Full Member
Offline
Posts: 189
Re: DIY Skidplate?
Reply #12 -
07/27/9 at 15:05:54
200 hard a-starboard into port over crest, 50 rough seas into huge swell, 100 come-a-bout hard to port, keep starboard of bouy, 50 large rock to port.
Back to top
Norman
VE3HWL
IP Logged
Yopofun
Full Member
Offline
Posts: 150
Owen Sound
Re: DIY Skidplate?
Reply #13 -
07/27/9 at 17:32:18
nhibbert wrote
on 07/27/9 at 15:05:54:
200 hard a-starboard into port over crest, 50 rough seas into huge swell, 100 come-a-bout hard to port, keep starboard of bouy, 50 large rock to port.
^^ Haha, thats awesome!
Hey Grant, you could probably pick up a some sheet metal, and a pair of metal cutters and just use your existing plastic skidplate as a template. Then just use a drill to make the holes...
Back to top
Tim
IP Logged
Pages: 1
‹
Previous Topic
|
Next Topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
General
»» Rally
- Buy and Sell
Event Forums
- Tall Pines Rally
« Home
‹ Board
MLRC Forum
» Powered by
YaBB 2.2.3
!
YaBB
© 2000-2008. All Rights Reserved.