MLRC Forum - Tech Help: Subaru Wiring

07/17/24 at 11:30:32

	Welcome, Guest. Please Login or Register

Home

Help

MLRC Forum › General › Rally › Tech Help: Subaru Wiring - Driving Lights

(Moderators: John_Vanos, Bruce VA3BRS, Derek Vincent, Phil Jeffries, BryceB)

‹ Previous Topic | Next Topic ›

Pages: 1

Tech Help: Subaru Wiring - Driving Lights (Read 2439 times)

Dave Cotie

God Member

Offline

Posts: 838
North Bay, Ontario

Tech Help: Subaru Wiring - Driving Lights
06/03/11 at 22:46:31

Over the last couple of days, I have been installing a couple of Hella 700FF's. I finished everything tonight and fired up the car and great they work! Wait a minute, they only work on Low beam not High beam.

I tied the line that is supposed to activate the relay into the red wire on the left headlight. According to the FSM wiring diagram that should be the high beam, which I confirmed by taking readings with a multimeter.

What have I screwed up here? Sad

Dave Cotie
VA3 COT

IP Logged

Dave Cotie God Member Offline Posts: 838 North Bay, Ontario	Re: Tech Help: Subaru Wiring - Driving Lights Reply #1 - 06/04/11 at 23:08:52 Forget it - I figured it out. On a negative-switched circuit the off position will have 12V. The low beams and high beams are not on at the same time. Tie-in to the low beams and now the lights only come on when the high beams are on.
Back to top	Dave Cotie VA3 COT IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board