Welcome, Guest. Please Login or Register
Maple Leaf Rally Club
 
  HomeHelpSearchLoginRegister  
 
Pages: 1
Send Topic Print
How much longer will the old peltors be ok? (Read 4369 times)
2000 Impreza
Junior Member
**
Offline



Posts: 78

How much longer will the old peltors be ok?
03/30/12 at 09:59:50
 
I have read a few things around the internet saying that the old bsi Peltors will no longer be usable in the near future but i have seen some conflicting information on how much longer they are good for.  Anyone here know for sure how much longer they are good in Canada and in the US?
Back to top
 
 
  IP Logged
RyanHuber
God Member
*****
Offline



Posts: 709
Ontario
Re: How much longer will the old peltors be ok?
Reply #1 - 03/30/12 at 14:26:15
 
CARS is allowing them for 10 years past the date of manufacture tagged on the helmet.
Back to top
 
 

Ryan Huber
VA3AWD
  IP Logged
2000 Impreza
Junior Member
**
Offline



Posts: 78

Re: How much longer will the old peltors be ok?
Reply #2 - 04/03/12 at 12:59:07
 
I was just about to grab one of those cheep bsi peltors off an online site but decided just to be safe I would see if I could find any rule changes for the BSI helmets in the cars rulebook.  If I read this right it does not look like there is much life left in that cert at all?

11.1.6 Only helmets meeting one of the following standards will be accepted for competition in any performance
rally and must be worn by all competitors when travelling in special stages:
(a) FIA Homologation -FIA 8860-2004
(b) Snell Foundation -SA 2005
-SAH 2010
-SA 2010
(c) British Standards Institution -BS 6658-85 type A/FR including all amendments
(Standard expires December 31st. 2013)

(d) SFI Foundation Inc. -SFI spec 31.1A and SFI spec 31.2A
-SFI spec 31.1/2005
Back to top
 
 
  IP Logged
RyanHuber
God Member
*****
Offline



Posts: 709
Ontario
Re: How much longer will the old peltors be ok?
Reply #3 - 04/03/12 at 14:30:10
 
From the bulletin sent to CARS license holders on Feb 7, 2012:

Rule Change #5 BSI Helmet Specifications (Effective Immediately)
Premise: The board approve an extension to the expiry date of British Standards
Institution BS6685-85.
11.1.6.c Reword to: “British Standards Institution BS 6658-85 type A/FR helmets
must be within 10 years of the date of manufacture and the original manufacturer’s
production date sticker must be permanently affixed to the helmet. Any helmets certified
to BS6658-85 type A/FR that do not have a production date sticker will expire on
December 31, 2013.
Back to top
 
 

Ryan Huber
VA3AWD
  IP Logged
2000 Impreza
Junior Member
**
Offline



Posts: 78

Re: How much longer will the old peltors be ok?
Reply #4 - 04/03/12 at 14:32:50
 
Perfect.  Thanks for the help I guess I will go ahead and grab one then.
Cheers
Back to top
 
 
  IP Logged
RyanHuber
God Member
*****
Offline



Posts: 709
Ontario
Re: How much longer will the old peltors be ok?
Reply #5 - 04/03/12 at 14:37:38
 
Just make absoultely certain it has a DOM sticker, and you'll be fine. My Peltor has a small silver sticker on the back. 2007-09 so I'm good for 5 more years, though I will almost certainly replace it before then.
Back to top
 
 

Ryan Huber
VA3AWD
  IP Logged
2000 Impreza
Junior Member
**
Offline



Posts: 78

Re: How much longer will the old peltors be ok?
Reply #6 - 04/03/12 at 14:42:39
 
Im going to grab a hans well I am at it to save on some shipping.  Most people go with 20degrees?
Back to top
 
 
  IP Logged
jimmy
YaBB Newbies
*
Offline



Posts: 27
Michigan
Re: How much longer will the old peltors be ok?
Reply #7 - 04/06/12 at 10:29:38
 
Also posted on the CARS website:

http://www.carsrally.ca/index.php?option=com_docman&task=doc_download&gid=50&Ite...


RyanHuber wrote on 04/03/12 at 14:30:10:
From the bulletin sent to CARS license holders on Feb 7, 2012:

Rule Change #5 BSI Helmet Specifications (Effective Immediately)
Premise: The board approve an extension to the expiry date of British Standards
Institution BS6685-85.
11.1.6.c Reword to: “British Standards Institution BS 6658-85 type A/FR helmets
must be within 10 years of the date of manufacture and the original manufacturer’s
production date sticker must be permanently affixed to the helmet. Any helmets certified
to BS6658-85 type A/FR that do not have a production date sticker will expire on
December 31, 2013.


press on,
Back to top
 
 

just a poor, dumb, Michigan navie
KC8YHT
jimmy
  IP Logged
Pages: 1
Send Topic Print