Welcome, Guest. Please Login or Register
Maple Leaf Rally Club
 
  HomeHelpSearchLoginRegister  
 
Pages: 1
Send Topic Print
FS Impreza WRX and Sti, struts and springs. (Read 3309 times)
dan sprongl
Senior Member
****
Offline



Posts: 386

FS Impreza WRX and Sti, struts and springs.
07/05/12 at 20:01:49
 

Good Afternoon.

I have the following shocks and components for sale.

2005-2007 Subaru STI, complete set of STi pinks, struts, springs, upper mounts.
These are a low km set, complete.
Shocks are 4 way valving adjustable.
$675/set.




2002-2007 STi pink springs with upper mounts,  you can use these on the 2002-03 Impreza and WRX.
Just use the upper mounts supplied.
Will fit 2002-2007 Impreza, RS, WRX or STi
Low km, approx 50 000 km.  Client went with coil overs.
$350 set with upper mounts.



2004-2005 Subaru Impreza WRX shock spring set.
The car set is complete, front and rear. Just not assembled.
All the parts are in the box, the mounts were removed to check the condition
of the shocks.
Under 100 000 km.

Complete set $175.



For more information, please email or pm.

Shipping is not included in the price.

Thanks

Dan
Four Star Motorsports inc
Back to top
 
 
  IP Logged
wrx86
YaBB Newbies
*
Offline



Posts: 1

Re: FS Impreza WRX and Sti, struts and springs.
Reply #1 - 08/14/12 at 19:55:02
 
Do you know if I have to change anything to get the first set to fit a 2002 wrx wagon?

Thanks

Paul
Back to top
 
 
  IP Logged
RyanHuber
God Member
*****
Offline



Posts: 709
Ontario
Re: FS Impreza WRX and Sti, struts and springs.
Reply #2 - 08/14/12 at 20:06:34
 
Pretty sure you'd need uprights and wheels in the least, possibly brakes as well. The ear spacing on STi struts after 2004 is wider than the WRX. Changing uprights means changing the bolt pattern to 5x114.3, and I'm pretty sure your brakes won't bolt to those uprights but I may be wrong.
Back to top
 
 

Ryan Huber
VA3AWD
  IP Logged
dan sprongl
Senior Member
****
Offline



Posts: 386

Re: FS Impreza WRX and Sti, struts and springs.
Reply #3 - 08/15/12 at 08:45:41
 
Hi

Ryan is almost right.

You do need the new uprights as the spread and thickness of the clevis is different, compared to the early models.

But there is a company in the States that makes a retro fit.  They take the new knuckles, machine them down to the proper thickness, and
make the front  hubin to a 5x100, andyou can reuse your existing brakes, rotors, etc.

The benefit of the new knuckles and bearings, both are very strong.

If you are interested in the swap, send me an email, and I can give you all the prices.

Thanks

Dan
dan@fourstarmotorsports.com
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print